Evidence map›Paper›PMID 38534874›Full record

ArticleBiomimetics (Basel, Switzerland)2024

Biocompatible Composite Filaments Printable by Fused Deposition Modelling Technique: Selection of Tuning Parameters by Influence of Biogenic Hydroxyapatite and Graphene Nanoplatelets Ratios.

Aura-Cătălina Mocanu, Andreea-Elena Constantinescu, Mădălina-Andreea Pandele, Ștefan Ioan Voicu, Robert-Cătălin Ciocoiu, Dan Batalu, Augustin Semenescu, Florin Miculescu, Lucian-Toma Ciocan

Abstract read
PubMed Full text at PMC Publisher
In one paragraph

Article in Biomimetics (Basel, Switzerland), 2024. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 1 paper.

0numbers the graph read from it
0cells of the map it votes in
1citing papers in PubMed
–field-weighted citation impact
1 · What the graph read from it

What it found

Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.

The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.

2 · The registry

The trial behind it

Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.

Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.

3 · Its place in the literature

Who cites it

1 citing paper in PubMed.

  1. Article
4 · The record

Corrections and comments

PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.

5 · Who and what money

Authors and funding

9 authors.

Aura-Cătălina MocanuDepartment of Metallic Materials Science, Physical Metallurgy, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, J Building, District 6, 060042 Bucharest, Romania.ORCID 0000-0003-1056-7150
Andreea-Elena ConstantinescuDepartment of Metallic Materials Science, Physical Metallurgy, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, J Building, District 6, 060042 Bucharest, Romania.ORCID 0000-0001-8430-8931
Mădălina-Andreea PandeleDepartment of Analytical Chemistry and Environmental Engineering, National University of Science and Technology POLITEHNICA Bucharest, 1-7 Gh. Polizu Str., 011061 Bucharest, Romania.
Ștefan Ioan VoicuDepartment of Analytical Chemistry and Environmental Engineering, National University of Science and Technology POLITEHNICA Bucharest, 1-7 Gh. Polizu Str., 011061 Bucharest, Romania.ORCID 0000-0001-7191-7471
Robert-Cătălin CiocoiuDepartment of Metallic Materials Science, Physical Metallurgy, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, J Building, District 6, 060042 Bucharest, Romania.ORCID 0000-0003-2333-0099
Dan BataluDepartment of Metallic Materials Science, Physical Metallurgy, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, J Building, District 6, 060042 Bucharest, Romania.ORCID 0000-0001-7393-5286
Augustin SemenescuDepartment of Engineering and Management of Obtaining Metallic Materials, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, J Building, District 6, 060042 Bucharest, Romania.
Florin MiculescuDepartment of Metallic Materials Science, Physical Metallurgy, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, J Building, District 6, 060042 Bucharest, Romania.ORCID 0000-0001-6757-5616
Lucian-Toma CiocanProsthetics Technology and Dental Materials Department, "Carol Davila" University of Medicine and Pharmacy, 37 Dionisie Lupu Street, District 1, 020022 Bucharest, Romania.ORCID 0000-0002-0329-5102

Funding

Unitatea Executiva Pentru Finantarea Invatamantului Superior a Cercetarii Dezvoltarii si Inovarii PN-III-P2-2.1-PED-2021-1650, contract number 583PED/2022
6 · The paper itself

Abstract

The proposed strategy for the extrusion of printable composite filaments follows the favourable association of biogenic hydroxyapatite (HA) and graphene nanoplatelets (GNP) as reinforcement materials for a poly(lactic acid) (PLA) matrix. HA particles were chosen in the <40 μm range, while GNP were selected in the micrometric range. During the melt-mixing incorporation into the PLA matrix, both reinforcement ratios were simultaneously modulated for the first time at different increments. Cylindrical composite pellets/test samples were obtained only for the mechanical and wettability behaviour evaluation. The Fourier-transformed infrared spectroscopy depicted two levels of overlapping structures due to the solid molecular bond between all materials. Scanning electron microscopy and surface wettability and mechanical evaluations vouched for the (1) uniform/homogenous dispersion/embedding of HA particles up to the highest HA/GNP ratio, (2) physical adhesion at the HA-PLA interface due to the HA particles' porosity, (3) HA-GNP bonding, and (4) PLA-GNP synergy based on GNP complete exfoliation and dispersion into the matrix.

Indexed as

HA/GNP ratio influenceimproved mechanical propertiesPLA/HA/GNP composite materialsprintable filaments

Identifiers

PMID38534874
PMCPMC10968339

What Socratic holds

Textmetadata
LicenceCC BY
Read underepoch 390

Registered trials

None linked

Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the Socratic graph.